Cap without Lock Cylinder

Cap without Lock Cylinder

Special tools, testers and auxiliary items required

• Assembly tool (T10389)





Removing

- Guide the hook (T10389) 40 mm - dimension A - into the door behind the locking bracket - 1 -.





- Pull the hook (T10389) back about 5 mm - arrow a -.

- Gently remove the door handle - 3 - from the door panel - arrow c -.

- Remove the cap - 2 - out of bearing bracket of door handle at a right angle - arrow b -.

• The door handle contact the door panel.

Installation

- Gently remove the door handle - 3 - from the door panel - arrow c -.





- Mount the cap - 2 - at a right angle onto the door handle mounting bracket.

- Release the door handle - 3 -.

- Guide the hook (T10389) 30 mm - dimension A - into the door behind the locking bracket - 1 -.

• While installing, the cap is pressed into the door panel.

- Press the locking bracket forward approximately 5 mm - arrow b -.