Mirror Housing

Mirror Housing

• Removing and installing is described only for the right mirror housing. Removing and installing left mirror housing is derived accordingly from this.

• The side turn signal is part of the assembly. Side Turn Signal,

Removing

- Remove mirror glass.





- Remove the housing frame. Refer to => [ Housing Frame ] Housing Frame

- To facilitate installation, fold rearview mirror forward.

- Move the retaining hook to the side - arrow a -

- Hold the assembly - 2 - secure.

- Pull the mirror housing - 1 - to the rear and then upward away from the mirror base plate - 3 -- arrow b -.

- Remove the assembly - 2 - downward - arrow c -.

Installation

- Assemble the mirror housing - 1 - and the assembly - 2 - on the mirror base plate - 3 -.





- Press the mirror housing - 1 - and the assembly - 2 - into the latch - arrow a - on the mirror base plate.

- Re-install mirror glass.

• Then perform a function test.