Diagram 64/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's Seat Adjustment Control Module, Lumbar Support Height and Fore/Aft Adjustment Button, Backrest Adjustment Button, Seats Adjustment Button





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E335 - Lumbar Support Height Adjustment Button

E336 - Lumbar Support Fore/Aft Adjustment Button

E418 - Seat Fore/Aft Adjustment Button

E421 - Inclination Adjustment Button

E424 - Seat Height Adjustment Button

E425 - Backrest Adjustment Button

J519 - Vehicle Electrical System Control Module Control Modules in Pass Compartment

J533 - Data Bus On Board Diagnostic Interface Control Modules in Pass Compartment

J810 - Driver's Seat Adjustment Control Module

S44 - Driver's Power Seat Adjustment Circuit Breaker 1 Overview Of Fuses

T6bl - 6-Pin Connector, blue

T10a - 10-Pin Connector, black, below driver's seat Component Locations

T12fv - 12-Pin Connector, black

T12sv - 12-Pin Connector, black

T20 - 20-Pin Connector, red

T32bv - 32-Pin Connector, grey

(96) - Ground Connection 1 (in heated seats wiring harness)

(602) - Ground Connection (in front left footwell) Overview Of Ground Connections in Rear Seats

(M95) - Plus Connection 1 (30) (in power seats wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

Next Diagram 64/3 (Tracks 15-28)