Switches

Switches

The following switches are installed in the door sill side trim:

• Driver Seat Lumbar Support Adjustment Switch (E176)

• Driver Seat Adjustment Control Head (E470)

Removing

- Switch off ignition.

- Remove the trim on the door sill side. Refer to => [ Door Sill Side Trim ] Door Sill Side Trim

- Carefully remove the button from the lumbar support switch - 3 - - 1 - using the release tool (T10236).






- Remove the two screws - 2 - (1 Nm) and remove the lumbar adjustment switch - 3 - from the trim.

- Carefully remove the button - 4 - from the seat adjustment control head - 6 - using the release tool (T10236).

- Remove the three screws - 5 - (1 Nm) and remove the seat adjustment control head - 6 - from the trim.

Installation

- Install in reverse order of removal.