Manual A/C System Heater and A/C Unit
Manual A/C System Heater and A/C Unit
1 Temperature Regulator Door Motor (V68)
• Check using Vehicle Diagnostic Tester.
• Removing and installing, refer to => [ Temperature Regulator Door Motor (V68) ] Temperature Regulator Door Motor (V68).
• Replacing: initiate the Basic Setting function with the Vehicle Diagnostic Tester. Refer to => [ Climatronic A/C System with Automatic Controls, Checking and Adjusting Components ] Climatronic A/C System with Automatic Controls, Checking and Adjusting Components.
2 Bracket
3 Screws
• Bolts must be unscrewed to separate air distributor and evaporator housing.
4 Cover
5 Recirculation Door Motor (V113)
• Check using Vehicle Diagnostic Tester.
• Removing and installing, refer to => [ Recirculation Door Motor (V113) ] Recirculation Door Motor (V113).
• Replacing: initiate the Basic Setting function with the Vehicle Diagnostic Tester. Refer to => [ Climatronic A/C System with Automatic Controls, Checking and Adjusting Components ] Climatronic A/C System with Automatic Controls, Checking and Adjusting Components.
6 Housing For Air Entry
• With recirculating air door.
7 Evaporator Housing Upper Section
• Disassembling and assembling evaporator housing, refer to => [ Evaporator Housing Overview ] Evaporator Housing Overview.
8 Evaporator Housing Lower Section
• Disassembling and assembling evaporator housing, refer to => [ Evaporator Housing Overview ] Evaporator Housing Overview.
9 Evaporator
• Removing and installing, refer to => [ Evaporator ] Service and Repair.
10 Evaporator Temperature Sensor (G308) or Evaporator Vent Temperature Sensor (G263)
• Check using Vehicle Diagnostic Tester.
• One or both of the component designations will appear, depending on software. The tasks are the same.
• Removing and installing, refer to => [ Evaporator Temperature Sensor (G308) or Evaporator Vent Temperature Sensor (G263) ] Evaporator Temperature Sensor (G308) or Evaporator Vent Temperature Sensor (G263).
11 Connection For Glove Compartment Cooling
• Remove the glove compartment. Refer to Storage Compartments, Covers and Trim.
• Installation position of glove compartment cooling connection, refer to => [ Installation Position Of Glove Compartment Cooling Connection ] Climatic Heating and A/C Unit.
12 Coolant Hose For Glove Compartment Cooling
• Remove the glove compartment. Refer to Storage Compartments, Covers and Trim.
13 Fresh Air Blower Series Resistor With Fuse (N24)
• Removing and installing, refer to => [ Fresh Air Blower Series Resistor With Fuse (N24) ] Service and Repair.
14 Fresh Air Blower (V2)
• Removing and installing, refer to => [ Fresh Air Blower (V2) ] Service and Repair.
15 Dust and Pollen Filter
• With activated charcoal filter.
• Removing and installing, refer to => [ Dust and Pollen Filter ] .
16 Cover
• For dust and pollen filter.
17 Heater Core
• Removing and installing, refer to => [ Heater Core ] Heater Core.
18 Heater Core Trim
19 Auxiliary Heater Heating Element (Z35)
• Only on vehicles with Diesel engine without auxiliary heater
20 Junction Box
21 Air Distribution Door Motor (V428)
• Removing and installing, refer to => [ Air Distribution Door Motor (V428) ] .