Cornering Lamp and Headlamp Range Control Module (J745)

Cornering Lamp and Headlamp Range Control Module (J745)

The cornering lamp and headlamp range control module is mounted on the tunnel support baseplate between the glove compartment and center console on the passenger side.

Removing

- Turn off the ignition and all electric consumers and remove the key.

- Remove the glove compartment.

- Remove bolts - arrows -.






- Remove the control module from its installation position while being careful of connected wires.

- Press the tab - arrow - and swivel the bracket - 1 - in the direction of - arrow 2 -.






Installing

Install in reverse order of removal. Note the following:

• Code the new headlamp range/cornering lamp control module after installing it. Refer to => [ Cornering Lamp and Headlamp Range Control Module (J745), Coding ] Testing and Inspection and then perform a basic setting on the headlamp. Refer to Headlamps, Checking and Adjusting.

- Check headlamp for function.

- Check the headlamp adjustment and adjust it if necessary. Refer to Headlamps, Checking and Adjusting.