Diagram 71/14 (Tracks 169-182)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Brake lamp switch, Accelerator pedal position sensor, Accelerator pedal position sensor 2, Clutch position sensor, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake lamp switch Antilock Brake System w/ Anti Slip Regulation [1][2]Brake Light Switch

F47 - Brake pedal switch Antilock Brake System w/ Anti Slip Regulation

G79 - Accelerator pedal position sensor Locations [1][2]Accelerator Pedal Position Sensor

G185 - Accelerator pedal position sensor 2 Locations [1][2]Accelerator Pedal Position Sensor

G476 - Clutch position sensor Locations [1][2]Clutch Pedal Position Sensor / Switch

J540 - Electromechanical parking brake control module Control Modules in Pass Compartment [1][2]Diagrams

J623 - Engine control module Control Modules in Engine Compartment

T4bc - 4-pin connector

T5m - 5-pin connector

T6h - 6-pin connector

T30p - 30-pin connector

T94 - 94-pin connector

(376) - Ground connection 11 (in main wiring harness)

(381) - Ground connection 16 (in main wiring harness)

(B131) - Connection (54) (in interior wiring harness)

* - Only for vehicles with a manual transmission

Previous Diagram 71/13 (Tracks 155-168)

Next Diagram 71/15 (Tracks 183-196)