Engine Controls - ECM Update for DTC P150A

01 12 11

April 4, 2012

2018467 Supersedes T.B. V010820 dated August 5, 2008 to include additional model and model year applicability.





Vehicle Information

Condition

Update Programming, P150A Stored in ECM Fault Memory





One or more of the following fault codes may be stored in the ECM Fault Memory:

Technical Background

Diverse software strategy.

Production Solution

Optimized software.

Service

Update Programming Procedure

Tip:
For Update-Programming using SVM, review and follow instructions in Technical Bulletin Instance 2014603 "Software Version Management".

The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim.





- Update the Engine Control Module using the SVM Unit code as listed in the table shown.

The procedure can be found in GFF under Functions/Component Selection, Software Version Management, Adapting Software.





Tip:
Ensure attached ECM/TCM Tuning Form has been completed and signed by customer (as required in SVM Technical Bulletin Instance 2014603).





Warranty

Required Parts and Tools





No Special Parts required.

Additional Information

All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.