Removal and Replacement

Steering System Assembly Overview






1 Universal Joint

2 Bolt

• M8 x 35

• 30 Nm

• Always replace if removed.

3 Steering Gear

• With Power Steering Control Module (J500).

• With Electromechanical Power Steering Motor (V187).

• With Engine Speed (RPM) Sensor (G28).

• With Steering Torque Sensor (G269).

• Can be checked in Guided Fault Finding using the Vehicle Diagnostic Tester.

• Removing and installing, refer to => [ Steering Gear ] Steering Gear.

• Correct any faults stored in the DTC memory before replacing the steering gear.

4 Wheel Bearing Housing

5 Nut

• M12 x 1.5

• 50 Nm

• Self-locking

• Always replace if removed.

6 Subframe

7 Bolt

• M10 x 70

• 50 Nm + 90° turn

• Always replace if removed.

8 Shield

9 Bolt

• 6 Nm

• Self-tapping

10 Electrical Wiring