Electrical and Electronic Component Locations

Electrical and Electronic Components and Component Locations






1 Transmission Control Module (J217)

• The control module sends and receives data from the Data Bus.

• Installed location and removing and installing. Refer to => [ Transmission Control Module ].

• Can be checked in "Guided Fault Finding" using vehicle diagnostic tester. Refer to => [ Vehicle Diagnosis Tester, Connecting and Selecting Functions ] Scan Tool Testing and Procedures.

2 Engine Control Module

• The control module sends and receives data from the Data Bus.

3 Multifunction Transmission Range Switch (F125)

• Installed location, refer to => [ Multifunction Transmission Range Switch ].

• Can be checked in "Guided Fault Finding" using the vehicle diagnostic tester. Refer to => [ Vehicle Diagnosis Tester, Connecting and Selecting Functions ] Scan Tool Testing and Procedures.

• Removing, installing and adjusting, refer to => [ Multifunction Transmission Range Switch (F125) ] Service and Repair.

4 Valve Body

• Installed location, refer to => [ Valve Body ].

• Check the components in "Guided Fault Finding" using the vehicle diagnostic tester. Refer to => [ Vehicle Diagnosis Tester, Connecting and Selecting Functions ] Scan Tool Testing and Procedures.

5 Sensor Wiring Harness

• With the transmission fluid temperature sensor.

• Installed location, refer to => [ Sensor Wiring Harness ].

6 Transmission Fluid Temperature Sensor (G93)

• Installed location, refer to => [ Sensor Wiring Harness ] Electrical and Electronic Components and Installed Locations.

• Can be checked in "Guided Fault Finding" using the vehicle diagnostic tester. Refer to => [ Vehicle Diagnosis Tester, Connecting and Selecting Functions ] Scan Tool Testing and Procedures.

7 Solenoid Valve Wiring Harness

• Installed location, refer to => [ Solenoid Valve Wiring Harness ].

8 Shift Lock Solenoid (N110)

• Installed location: The shift lock solenoid is located in the selector mechanism.

• Can be checked in "Guided Fault Finding" using the vehicle diagnostic tester. Refer to => [ Vehicle Diagnosis Tester, Connecting and Selecting Functions ] Scan Tool Testing and Procedures.

9 Selector Mechanism

• With the Tiptronic switch (F189).

• The Tiptronic switch is a component of the selector mechanism.

• Can be checked in "Guided Fault Finding" using the vehicle diagnostic tester.

• Replace the selector mechanism if faulty. Refer to => [ Selector Mechanism with Lever ] Shift Mechanism with Lever.

10 Transmission Input Speed Sensor (G182)

• Installed location, refer to => [ Transmission Input Speed Sensor and
Transmission Output Speed Sensor ].

• Can be checked in "Guided Fault Finding" using the vehicle diagnostic tester. Refer to => [ Vehicle Diagnosis Tester, Connecting and Selecting Functions ] Scan Tool Testing and Procedures.

11 Transmission Output Speed Sensor (G195)

• Installed location, refer to => [ Transmission Input Speed Sensor and
Transmission Output Speed Sensor ].

• Can be checked in "Guided Fault Finding" using the vehicle diagnostic tester. Refer to => [ Vehicle Diagnosis Tester, Connecting and Selecting Functions ] Scan Tool Testing and Procedures.

12 Diagnostic Connection

• Installed location, refer to => [ Diagnostic Connection ].

13 Transmission Range Display (Y6)

• Installed location, refer to => [ Transmission Range Display ].

Transmission Control Module





Installed location: The control module - arrow - is located in the left front wheel housing.

- The wheel housing liner must be removed for removal and installation.

Multifunction Transmission Range Switch





Installed location: The multifunction switch is located on the upper side of the transmission.

Valve Body





Installed location: The valve body is bolted to the underside of the transmission housing and is covered by the transmission fluid pan.

The solenoid valve 1 (N88) , solenoid valve 2 (N89) , solenoid valve 3 (N90) , solenoid valve 4 (N91) , solenoid valve 5 (N92) , solenoid valve 6 (N93) , solenoid valve 9 (N282) and solenoid valve 10 (N283) are secured to the valve body.

Sensor Wiring Harness





• With integrated transmission fluid temperature sensor - arrow -

Installed location: The wiring harness is secured to the valve body in the transmission.

Solenoid Valve Wiring Harness





Installed location: The wiring harness is secured to the valve body in the transmission.

Transmission Input Speed Sensor and Transmission Output Speed Sensor





Installed location: Inside the transmission housing above the valve body.

1 Transmission input speed sensor
2 Transmission output speed sensor

Diagnostic Connection





Installed location: The data link connector - arrow - is located under the driver side storage compartment on the left side.

Transmission Range Display





Installed location: Inside the instrument cluster