Quick Release Coupling Seal Kit

Quick Release Coupling Seal Kit

• Replace the seal kit if there are leaks at the quick release coupling and the clip is overstretched.

• The clip => [ (Item 7) Clip ] Transmission Fluid Cooler Overview and the seals => [ (Item 5) Seal ] Transmission Fluid Cooler Overview and => [ (Item 6) Seal ] Transmission Fluid Cooler Overview for sealing the quick release coupling are included in the seal kit.

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

• Drip Tray for VAS 6100 (VAS 6208)

• Circlip pliers

Removing

• The supply and return lines are removed from the connection on the transmission fluid cooler. Refer to => [ Transmission Fluid Cooler Overview ] Transmission Fluid Cooler Overview

- Open the clip - A - and remove it from the coupling.






- Pry the seals - 1 and 2 - out of the groove.







Only pry the seals out of the connection with plastic tools, for example the trim removal wedge (3409). Do not use a screwdriver. It could cause leaks.

Installing

- Lubricate the seal - 1 - with transmission fluid and insert it in the groove by hand.






- Lubricate the seal - 2 - with transmission fluid and carefully slide it on as far as the stop. Make sure the seal does not twist inside out.

• The clip is installed next. Follow the description exactly to avoid overstretching the clip.

- Spread the clip a maximum - a - of 16 mm and place it on the coupling.






Clip Installed Position





The guide - arrow - faces the connection - 2 -.

- Connect the supply and return lines to the connections on the transmission fluid cooler

When connecting, the clip engages audibly with a click in the groove on the connection - 1 -.






- Make sure the clip is seated correctly.

The clip must be seated completely in the groove on the coupling - 2 - and the connection - 1 -. Dimension - a - should be a maximum of 5 mm.






If the dimension is greater than 5 mm, the clip was overstretched and it must be replaced.


Do not bend the clip together. Otherwise the coupling could loosen later and transmission fluid could leak out.

- Check the transmission fluid level. Refer to => [ Transmission Fluid Level, Checking and Filling ] Transmission Fluid Level, Checking and Filling.