Headlamp Washer System

Headlamp Washer System

• Additional information:

Refer to the Owner's Manual.

For every fifth activation of windshield washer system, headlamps are also washed if windshield wiper lever is pulled toward steering wheel for at least 1.5 seconds - as long as low beam or high beam headlamps are switched on.

The "active time" of headlamp cleaning system can be adjusted variably between 0 seconds and 10 seconds. Refer to => [ Adapting ] Adapting.

After assembly work or when first operating headlamp cleaning system, it must be ventilated to ensure proper function of lift cylinders and spray nozzles. Refer to => [ Headlamp Washer System, Bleeding ] Procedures.

DTC Recognition and Display

Vehicle Electrical System Control Module (J519) is equipped with On Board Diagnostics (OBD) which assists troubleshooting.

Use the Vehicle Diagnostic Tester under "Guided Fault Finding".