Diagram 4/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Front Passenger's Entry Lamp and Turn Signal (in outside mirror), Front Passenger's Mirror Adjustment and Mirror Fold-in Motor, Front Passenger's Door Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J387 - Front Passenger's Door Control Module Control Modules in Pass Compartment

J519 - Vehicle Electrical System Control Module Control Modules in Pass Compartment

J533 - Data Bus On Board Diagnostic Interface Control Modules in Pass Compartment

L132 - Front Passenger's Exterior Mirror Turn Signal Lamp

T2ae - Double Connector, white

T3sb - 3-Pin Connector, black

T3h - 3-Pin Connector

T16g - 16-Pin Connector, black

T20 - 20-Pin Connector, red

T20b - 20-Pin Connector, black

T28a - 28-Pin Connector, behind right lower A-pillar trim Component Locations

V25 - Front Passenger's Mirror Adjustment Motor

V122 - Front Passenger's Fold-in Motor Motor

V150 - Front Passenger's Mirror Adjustment Motor

W53 - Front Passenger's Entry Lamp (in outside mirror)

Z5 - Front Passenger's Heated Outside Mirror

(206) - Ground Connection (in Front Passenger's door wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

Previous Diagram 4/8 (Tracks 85-98)

Next Diagram 4/10 (Tracks 113-126)