Diagram 14/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Oil Pressure/Temperature Sensor, Haldex Clutch Pump, All-Wheel Drive Control Module, Haldex Clutch Control Valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G437 - Oil Pressure/Temperature Sensor All-Wheel Drive (4MOTION)

J492 - All-Wheel Drive Control Module Control Modules in Luggage Comp.

J533 - Data Bus On Board Diagnostic Interface Control Modules in Pass Compartment

N373 - Haldex Clutch Control Valve All-Wheel Drive (4MOTION)

SC10 - Fuse 10 (on fuse panel C) Overview Of Fuses

T2hz - Double Connector

T6ab - 6-Pin Connector, black Component Locations

T8za - 8-Pin Connector

T20 - 20-Pin Connector, red

V181 - Haldex Clutch Pump All-Wheel Drive (4MOTION)

(61) - Ground Connection (on left C-pillar) Overview Of Ground Connections in Luggage Comp.

(369) - Connection 4 (in main wiring harness)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)