Diagram 71/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Oil pressure switch, Engine coolant level sensor, Instrument cluster control module, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F1 - Oil pressure switch Engine Management System

G1 - Fuel gauge

G30 - Charge air pressure gauge

G32 - Engine coolant level sensor Locations

J119 - Multifunction indicator

J285 - Instrument cluster control module Control Modules in Pass Compartment

J533 - Data bus on board diagnostic interface Control Modules in Pass Compartment

K3 - Oil pressure indicator lamp

K31 - Cruise control indicator lamp

K38 - Oil level indicator lamp

K83 - Malfunction indicator lamp

K105 - Low fuel level indicator lamp

K250 - Hill descent control indicator lamp

T1 - Single connector

T2c - Double connector

T14a - 14-pin connector Component Locations

T20 - 20-pin connector

T36 - 36-pin connector

(410) - Sensor ground connection 1 (in main wiring harness)

Previous Diagram 71/15 (Tracks 183-196)