Ignition Switch and Lock Cylinder, Through 05.10, Steering Lock Housing

Steering Lock Housing


Follow the procedure in the repair information when disconnecting and connecting the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

• To remove the steering lock housing, remove the steering column switch base carrier first.


• Steering lock may be destroyed.

• If steering lock is operated without lock cylinder, it locks and must be replaced.

• Steering lock must not be operated without lock cylinder.

Removing

- Disconnect the battery. Refer to => [ Battery, Disconnecting ] Battery, Disconnecting.

- Remove the steering column switch base carrier. Refer to => [ Steering Column Switch Base Plate ] Steering Column Switch Base Plate.