Left Rear Level Control System Sensors

Left Rear Level Control System Sensors

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1331)

• Left rear level control system sensor (G76) , adaptive chassis DCC, AWD, removing and installing, refer to => [ Left Rear Level Control System Sensor, AWD ] Left Rear Level Control System Sensor, AWD.

Removing

- Disconnect the harness connector - 1 -.






- Remove the bolts - 2 - from the lower transverse link.

- Remove bolts - arrows - from the subframe.

- Remove left rear level control system sensor.

Installing

Install in reverse order of removal. Note the following:

The left rear level control system sensor lever must point toward the outside of the vehicle.

- After replacing, perform a headlamp basic setting using the Vehicle Diagnostic Tester in Guided Fault Finding function.

Tightening Specifications