Transmission Output Speed Sensor

Transmission Output Speed Sensor (G195)

Removing

- Remove the valve body. Refer to => [ Valve Body ] Valve Body.

- Remove the bolt - 2 - from the output speed sensor.






- Remove the sensor from the transmission.

Installing

Install in reverse order of removal. Pay attention to the following:

- Press the sensor all the way into the transmission.

- Install the bolt - 2 - for the output speed sensor. For the correct tightening specification refer to => [ Fastener Tightening Specifications ] Specifications.

- Install the valve body. Refer to => [ Valve Body ] Valve Body.