Window Guide Trim Molding

Window Guide Trim Molding

Removing

- Remove the trim. Refer to => [ Trim Panel ] Trim Panel.





- Push window guide - 2 - in upper front and rear area slightly to side.

- Remove both clips - 3 -.

- Guide trim removal wedge (3409) - 3 - in carefully between trim molding - 1 - and window guide - 2 -.





- Slide trim removal wedge (3409) evenly between trim molding - 1 - and window guide - 2 -.

Installation

- Spray soap/water solution on to window guide.





- Press trim molding - 1 - by hand evenly - arrow - into window guide - 2 -.

- Then press window guide correctly into trim molding mount with pinch roller (T 10314).

Further installation is in reverse order of removal.