Locking and Unlocking Components Assembly Overview

Locking and Unlocking Components Assembly Overview





1 Catch

• Removing:

- Remove the hex nuts - 2 -.

• Adjusting:

- Catch can be adjusted toward the left or right in its longitudinal holes.

2 Hex nut

• Quantity: 3

• 12 Nm

3 Release

• Is divided by release coupling - 9 -.

• the release can be disconnected at release coupling for removing the front end.

• Disconnecting, refer to => [ Release, Disconnecting ] Release, Disconnecting

4 Actuating lever

• Removing and Installing, refer to => [ Operating Lever ] Operating Lever

5 A-pillar lower trim

• Removing and installing, refer to

6 Bolt

• 1.5 Nm

• Quantity: 2

7 Mounting bracket

8 Bracket

• Secured to longitudinal member for upper wheel housing on driver side.

9 Release Coupling

• Release, disconnecting, refer to => [ Release, Disconnecting ] Release, Disconnecting

10 Lid lock

• Removing and Installing, refer to => [ Rear Lid Lock ] Rear Lid Lock

• Adjusting, refer to => [ Hood, Adjusting ] Hood, Adjusting