Balance Shaft and Oil Pump Chain Overview

Balance Shaft and Oil Pump Chain Overview





1 Drive Chain

• Removing and installing, refer to => [ Balance Shaft and Oil Pump Chain ] Balance Shaft and Oil Pump Chain.

2 Oil Pump Sprocket

• Installed position: the side with the lettering on it faces the engine.

3 Bolt

• 62 Nm

• If it is not possible to tighten the bolt to specification, remove the lower oil pan and the oil baffle and counter hold the bolt with an open end wrench on the oil pump driveshaft.

4 Thrust Washer

5 Spring

6 Crankshaft

7 Bolt

• 23 Nm

8 Balance Shaft Sprocket

• Installed position: the side with the lettering on it faces the transmission.

9 Bolt

• 9 Nm

10 Chain Tensioner

• With guide rail.

11 Gasket

• Replace