Garage Door Opener Control Head (E284)

Garage Door Opener Control Head (E284)


When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

The control head consists of the following components:

• Garage Door Opener Button 1 (E392)

• Garage Door Opener Button 2 (E393)

• Garage Door Opener Button 3 (E394)

• Garage Door Opener Indicator Lamp (K179)

• Push Button Illumination (L76)

Removal

- Turn off the ignition and all electric consumers and remove the key.

- Carefully pry control head out of console in molded headliner - arrow -.






- Disengage retaining tabs - arrows - and remove control head from frame.






Installation

Install in reverse order of removal.