Recoding Service Intervals With Vehicle Diagnostic Tester

Service Interval Display, Recoding

- Connect the Vehicle Diagnostic Tester, refer to=> [ Vehicle Diagnosis, Testing and Information System, Connecting ] Testing and Inspection.

- Switch ignition on.

- Touch button/field on screen: "GUIDED FUNCTIONS."

• If the displays indicated in the procedure are not shown on the display. Refer to Operating Instructions for the Vehicle Diagnostic Tester.

- Select in succession:

• Brand

• Model

• Model year

• Engine Code

- Confirm vehicle identification.

If vehicle identification was performed correctly, then press the > button to confirm.

- Select in succession:

• "Instrument cluster" - arrow -





• "Adapt service interval extension".

- Perform Adaptation according to instructions from "GUIDED FUNCTIONS".

End Adaptation





- Press the Go to button - arrow - on display.





- Press Exit button - arrow - on display.

- Press Exit button in exit menu.

- Turn off ignition and disconnect diagnostic connection.