Rear Lid Courtesy Lamp (W51)

Rear Lid Courtesy Lamp (W51)


When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

Removal

- Turn off the ignition and all electric consumers and remove the key.

- Carefully pry out Rear Lid Courtesy Lamp using a screwdriver.






- Release and disconnect the connector - arrow -.






Bulb, Replacing

- Release retaining tab - 1 - and remove reflector plate - 2 -.






- Push contact plate - 1 - of Rear Lid Courtesy Lamp in - direction of arrow - and remove lamp - 2 - out of socket.






- Replace the tubular bulb (12V, 5 W).

Installation

Install in reverse order of removal.