Warranty Test

Warranty Test


Batteries that have a colorless or light yellow visual indicator do not have to be tested or charged. Jump starting must not be used!

There is a risk of explosion during testing, charging or jump starting.

These batteries must be replaced.

- Select "Warranty Test".

- Select "inside the vehicle" or "outside of the vehicle".

- Select "at the battery pole" or "at the battery jump start terminal".

- Section vehicle model.

- Measure the temperature. Hold the temperature sensor approximately 5 cm above the battery pole until the temperature is stable.

- Select the type of battery: "standard", "AGM", "2*6V" or "Gel" or scan it.

- Select or scan the battery capacity.

- Start the test.

- Print out the test report if necessary.