Rear Air Spring Damper Assembly Overview

Rear Air Spring Damper Assembly Overview






1 Bolt

• 30 Nm

• Quantity: 4

2 Mounting Bracket

3 Nut

• 60 Nm

• Always replace after removal.

4 Rubber Mount

5 Seal

• Always replace.

6 Residual Pressure Retaining Valve

• 10 Nm

• Observe important notes about removal and installation. Refer to => [ If residual pressure retaining valve sticks, the
vehicle must be on a hoist and the wheels must rotate freely in order to replace
the valve. ] Rear Suspension.

• Removing and installing, refer to => [ Residual Pressure Retaining Valve ] Rear Suspension.

7 Air Spring

• Follow repair notes for servicing air spring dampers. Refer to => [ Air Spring Damper Repair Information ] Air Spring Damper Repair Information.

When the vehicle has been driven 200,000 km, if there is damage to an air spring, it is recommended that the opposite air spring is also replaced.

8 Buffer Stop

9 Nut

• 7 Nm

10 Protective Cap

11 Shock Absorbers

• Allocation, refer to the Electronic Parts Catalog (ETKA).

• Follow repair notes for servicing air spring dampers. Refer to => [ Air Spring Damper Repair Information ] Air Spring Damper Repair Information.

12 Seal

• Always replace

• Grease with (N 052 150 00).

13 Protective Sleeve

14 Clamp