Gas-filled Strut Cover, through 10.2006

Gas-filled Strut Cover, through 10.2006

Removing

- Headliner is removed.





- Loosen cover - 1 - at rear corners - a arrows - with Trim Removal Wedge (3409).

- Pull cover back in - direction of arrow b - and remove.

Installation

- Slide cover - 1 - into small opening as far as stop - arrow a -.





- Press on both corners at the same time - b arrows -.

- Press on edge all around, from back to front - c arrows -.

• Check cover to make sure it makes continuous contact and is not pressed on too far.