Mounting Bracket

Mounting Bracket

Removing

- Fold right seat cushion forward.

- Remove bolts - 1 -, - 2 - and - 3 - (20 Nm).

• The bolts are microencapsulated and must therefore be replaced after every removal.

• Before installing the new bolts, the threads of the corresponding nuts must be cleaned.

- Remove mounting bracket from vehicle.





Installation

- To install, perform the steps used for removal in reverse order.

• During installation, bolts must be installed in the order - 1 -, - 2 - and - 3 -. The tightening specification is 20 Nm.