Pressure Leak Test

Pressure Leak Test

Special tools, testers and auxiliary items required

• Brake Pressure Gauge 0-250 Bar (V.A.G 1310A)





Test Prerequisites

The brake system (hydraulic unit, hoses, lines and calipers) operating properly and free of leaks.

- Remove the bleeder valve from one of the front brake calipers.

- Connect the (V.A.G 1310 A) and bleed.

- Apply pressure to the brake pedal until the gauge indicates a pressure of 50 bar. The pressure must not drop by more than 4 bar during the test period of 45 seconds. Replace the master cylinder if pressure drops greatly.