Diagram 73/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Knock sensor 1, Knock sensor 2, Generator switch-in relay, Vehicle electrical system control module, Engine control module, Intake manifold runner control valve, Intake manifold runner control valve 2





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G61 - Knock sensor 1 Locations

G66 - Knock sensor 2 Locations

J255 - Climatronic control module Control Modules in Rear Seats

J301 - A/C control module Control Modules in Rear Seats

J442 - Generator switch-in relay Overview Of Relay Carrier

J519 - Vehicle electrical system control module Control Modules in Rear Seats

J623 - Engine control module Control Modules In Engine Compartment

N316 - Intake manifold runner control valve Locations

N403 - Intake manifold runner control valve 2

T2xv - Double connector

T2xw - Double connector

T3ag - 3-pin connector

T3aj - 3-pin connector

T6d - 6-pin connector

T10c - 10-pin connector Overview Of Connector Stations And Connectors

T14n - 14-pin connector

T17 - 17-pin connector Overview Of Connector Stations And Connectors

T26a - 26-pin connector

T60 - 60-pin connector

T94 - 94-pin connector

(220) - Sensor ground connection (in engine compartment wiring harness)

(A193) - Connection (87a) (in instrument panel wiring harness)

(D118) - Connection (16) (in engine compartment wiring harness)

Previous Diagram 73/7 (Tracks 71-84)

Next Diagram 73/9 (Tracks 99-112)