Diagram 14/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Differential Control Module, Instrument Cluster, Instrument Cluster Control Module, Data Bus On Board Diagnostic Interface, Data Link Connector (DLC)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F321 - Parking Brake Contact Switch Locations

J285 - Instrument Cluster Control Module Control Modules in Rear Seats

J533 - Data Bus On Board Diagnostic Interface Control Modules in Rear Seats

J646 - Differential Control Module Control Modules in Rear Seats

K - Instrument Cluster

T1c - Single Connector

T4sb - 4-Pin Connector

T32a - 32-Pin Connector, blue

T32b - 32-Pin Connector, green

T47a - 47-Pin Connector

(B384) - Powertrain CAN-Bus High Connection 2 (in main wiring harness)

(B385) - Powertrain CAN-Bus High Connection 3 (in main wiring harness)

(B387) - Powertrain CAN-Bus High Connection 5 (in main wiring harness)

(B391) - Powertrain CAN-Bus Low Connection 2 (in main wiring harness)

(B392) - Powertrain CAN-Bus Low Connection 3 (in main wiring harness)

(B394) - Powertrain CAN-Bus Low Connection 5 (in main wiring harness)

(B432) - Emergency (Foot) Brake Connection (in main wiring harness)

(B444) - OBD Connection 1 (in main wiring harness)

* - Only models with manual transmission

** - Only models with automatic transmission

Previous Diagram 14/4 (Tracks 29-42)

Next Diagram 14/6 (Tracks 57-70)