HID Headlamps Overview, From 12.06
HID Headlamps Overview, From 12.06
• Check for possible influences upon the headlamp adjustment, check the adjustment itself, and if needed, adjust the headlamps. Refer to Maintenance Procedures; Rep. Gr. 03.
- Tightening Specifications, refer to => [ Fastener Tightening Specifications, Headlamp ] [1][2]Headlamp.
1 - Wiring
• Between High intensity gas discharge lamp (L13) and High intensity discharge lamp (L14) and Left Headlamp Range Control Module (J567) and Right Headlamp Range Control Module (J568).
2 - Left Headlamp Beam Adjustment Motor (V48) and Right Headlamp Beam Adjustment Motor (V49)
• Removing and installing, refer to => [ Headlamp Range Control Positioning Motor ] Headlamp Range Control Positioning Motor.
3 - Screws
• For Left Headlamp Beam Adjustment Motor (V48) and Right Headlamp Beam Adjustment Motor (V49).
4 - Cap
5 - High Intensity Gas Discharge Lamp (L13) and High Intensity Discharge Lamp (L14) ("Bi-Xenon")
Note usage and safety notes for gas discharge headlamps, refer to => [ HID Headlamps, Usage and Safety Precautions ] Service Precautions.
• Type D1S, 35 W
• Removing and installing, refer to => [ HID Bulb ] HID Bulb.
• Checking, refer to => [ Vehicle Electrical System, Output Diagnostic Test Mode ] Scan Tool Testing and Procedures.
• High intensity gas discharge lamp (L13) and Left High-intensity Gas Discharge Lamp Control Module (J343) comprise one component.
• High intensity discharge lamp (L14) and Right High-intensity Gas Discharge Lamp Control Module (J344) comprise one component.
6 - Left High Beam Headlamp (M30) and Right High Beam Headlamp (M32) (Auxiliary High Beam Headlamp)
• Bulb H7 12V, 55 W
• Removing and installing, refer to => [ Auxiliary High Beam Bulb ] Auxiliary High Beam Bulb.
• Checking, refer to => [ Vehicle Electrical System, Output Diagnostic Test Mode ] Scan Tool Testing and Procedures.
7 - Cap
8 - Cap
9 - Lamp Socket With Grip
• For Left front turn signal bulb (M5) and Right front turn signal bulb (M7).
10 - Left Parking Lamp (M1) and Right Parking Lamp (M3)
• Lamp 12V, WY 5 W (for North American models, colored orange)
• Removing and installing, refer to => [ Parking Lamp Bulb ] Parking Lamp Bulb.
• Checking, refer to => [ Vehicle Electrical System, Output Diagnostic Test Mode ] Scan Tool Testing and Procedures.
11 - Left Front Turn Signal Light (M5) and Right Front Turn Signal Light (M7)
• Lamp 12V, PY 21 W Diadem
• Removing and installing, refer to => [ Front Turn Signal Bulb ] Front Turn Signal Bulb.
• Checking, refer to => [ Vehicle Electrical System, Output Diagnostic Test Mode ] Scan Tool Testing and Procedures.
12 - Headlamp
• Removing and installing, refer to => [ Headlamps ] Headlamps.
• Correcting installation position of headlamp, refer to => [ Headlamps, Correcting Installation Position ] Headlamps, Correcting Installation Position.
• Perform a basic setting on the headlamp. Refer to Maintenance Procedures; Rep. Gr. 03.
13 - Connection
• To Left Headlamp Beam Adjustment Motor (V48) and Right Headlamp Beam Adjustment Motor (V49).
14 - Connection
• From wire for (High intensity gas discharge lamp (L13) and High intensity discharge lamp (L14) ).
15 - Left Headlamp Range Control Module (J567) and Right Headlamp Range Control Module (J568)
• Removing and installing, refer to => [ Headlamp Range Control Module ] Headlamp Range Control Module.
• Coding Left Headlamp Range Control Module (J567) => [ Left Headlamp Range Control Module, Coding ] Left Headlamp Range Control Module (J567), Coding.
• Coding Right Headlamp Range Control Module (J568) => [ Right Headlamp Range Control Module, Coding ] Right Headlamp Range Control Module (J568), Coding.
• If Left headlamp range control module (J567) and Right headlamp range control module (J568) is coded, basic setting of headlamps must be performed after the coding. Refer to Maintenance Procedures; Rep. Gr. 03.
16 - Screws
• For Left Headlamp Range Control Module (J567) and Right Headlamp Range Control Module (J568).
17 - Adjustment Bushings
18 - Screws
• For front headlamp mount.
19 - Headlamp Mount
• Left Headlamp Mount, 6-Cylinder TDI, removing and installing, refer to => [ HID Left Headlamp ] HID Left Headlamp.
• Left Headlamp Mount, 6-Cylinder Gasoline, removing and installing, refer to => [ HID Left Headlamp Mount ] HID Left Headlamp Mount.
• Left Headlamp Mount, 10-Cylinder TDI and 8-Cylinder Gasoline, removing and installing, refer to => [ HID Left Headlamp Mount ] HID Left Headlamp Mount.
• Right Headlamp Mount, 6-Cylinder TDI, removing and installing, refer to => [ HID Right Headlamp Mount ] HID Right Headlamp Mount.
• Right Headlamp Mount, 6-Cylinder Gasoline, removing and installing, refer to => [ HID Right Headlamp Mount ] HID Right Headlamp Mount.
• Right Headlamp Mount, 10-Cylinder TDI and 8-Cylinder Gasoline, removing and installing, refer to => [ HID Right Headlamp Mount ] HID Right Headlamp Mount.
20 - Securing Clip
21 - Locking Bolt
22 - Alignment Bushings
• For rear headlamp mount mounting bolts.
23 - Screws
• For rear headlamp mount.
24 - Connector
25 - Securing Clip
26 - Adjusting Shaft For High Beam Lateral Adjustment
27 - Adjusting Shaft For Dip And High Beam Height Adjustment
28 - Screws
• For adjusting shafts
29 - Connector
• To Left Headlamp Range Control Module (J567) and Right Headlamp Range Control Module (J568).
- Left Headlamp Reflector Adjustment Solenoid (N395) and Right Headlamp Reflector Adjustment Solenoid (N396)
• Left Headlamp Reflector Adjustment Solenoid (N395) and Right Headlamp Reflector Adjustment Solenoid (N396) are located inside the headlamp and cannot be removed or adjusted.
• Headlamp must be replaced if damaged.
• Checking, refer to => [ Vehicle Electrical System, Output Diagnostic Test Mode ] Scan Tool Testing and Procedures.