4.2L (BAR)

Generator Overview






1 Screw

• 22 Nm

2 Tensioner For Ribbed Belt

3 Ribbed Belt

• Checking ribbed belt, refer to => [ Ribbed Belt, Checking ] Testing and Inspection.

• Ribbed belt routing, refer to => [ Ribbed Belt Routing ] Ribbed Belt Routing.

4 Cap

5 Screw

• 22 Nm

• M8 x 90 mm

6 Generator

• B+ wire fastener to generator, 15 Nm, refer to => [ B+ Cable Mount on Generator ] Procedures.

• Neither the voltage regulator nor the carbon brushes can be replaced individually; if a repair is required, the entire generator must be replaced.

• Generator, removing and installing, refer to => [ Generator ] Generator.

7 Screw

• M8 - 22 Nm

• M10 - 46 Nm

8 Bushing

• Quantity: 2

9 Bracket

10 Screw

• 9 Nm

11 Mounting Bracket

• For idler pulley

12 Ribbed Belt Idler Pulley

13 Screw

• 22 Nm

14 Belt Pulley - Crankshaft

15 Screw

• 22 Nm + 45° (1/8 additional turns)

• Replace

16 Bushing

• Quantity: 2

17 Bracket

• For ribbed belt tensioner.

18 Screw

• 9 Nm