Procedures

Power Windows, Checking Position

CAUTION!
After disconnecting and connecting the battery (in luggage compartment and / or under front left seat) the excess force limitation of electric windows does not function. This can cause serious injuries if e.g. fingers are caught in the window!

• After disconnecting and connecting the vehicle battery (in luggage compartment and /or under front left seat) the automatic opening and closing features for the electric windows do not function.

• Therefore, the electric windows must be positioned again immediately, before a new vehicle is delivered.

• The vehicle battery must not be disconnected after the electric windows have been positioned.

Perform the following work sequence to position the electric windows:

• The following work sequence is for the front left window. The positioning for the remaining windows is performed in the same manner using the respective switch in the driver's door.

- Close all doors and windows completely.

- Switch ignition on.

- Open front left side window fully by pressing and holding the button in the driver's door.

- Close the front left side window fully by lifting and holding the button in the driver's door, then release button.

- Lift button again for 1 second. Now when the button is pressed briefly the window will lower fully and when the button is lifted briefly the window will raise fully.