Sidemember Trim Panel Assembly Overview

Sidemember Trim Panel Assembly Overview

• The description applies to the left side. The right side is identical.






1 Sill panel cover

Removing

- Unscrew the screws and remove the rivets.

- Pull the sill panel cover with the clips out of the grommets.

Installation

- Press the sill panel cover with the clips into the grommets on the sill panel.

- Insert the rivets, tighten the screws, screw tightening specification: 1.5 Nm.

2 Bolt

• Quantity: 2

• Tightening specification: 1.5 Nm

3 Clip with protective grommet

• Quantity: 12

4 Expanding nut

• Quantity: 2

5 Expanding rivet with grommet

• Quantity: 5

6 Rivet

• Quantity: 5

7 Bolt

• Quantity: 2

• Tightening specification: 1.5 Nm

8 Grommet

• Quantity: 12

9 Expanding nut

• Quantity: 2