Partial Power Seat Trim

Partial Power Seat Trim

The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

- Pull handle - 2 - upward.

- Press securing clip metal tab - 1 - inward using a small screwdriver and remove handle - 2 - from adjustment lever - 3 -.

• For the sake of illustration, securing clip is depicted as removed in the illustration.

- Remove the securing clip - 1 - from the adjusting lever - 3 -.

- Compress clamping pin - 4 - inward and remove expanding clip - 5 -.

- Remove the bolt - 6 - (3.5 Nm).

- Loosen trim - 7 - from seat frame and disconnect wiring harnesses on inner side of trim from switches.






Installing

- Install in reverse order of removal.