Removal and Replacement

Breather Assembly

Removing and Installing the Line to the Breather Assembly





- Pull up the clip - 2 - with a screwdriver or a pointed tool and remove the line - 4 - from the breather assembly - 1 -.

- Push the line - 4 - with the O-ring - 3 - into the breather assembly - 1 - until the clip - 2 - engages audibly.

- Pull on the line to make sure it is secure.

Removing and Installing the Breather Assembly from the Slave Cylinder





- To remove, pull up the clip - 2 - with a screwdriver or a pointed tool and remove the breather assembly - 4 - from the slave cylinder - 1 -.

- Check the O-ring - 3 - on the clutch slave cylinder. Press on the breather assembly to the slave cylinder connection until the clip - 2 - engages audibly.

- To check, pull on the breather assembly.

- Bleed the clutch system. Refer to => [ Clutch System, Bleeding ] Procedures.