Warranty Test, Performing

Warranty Test, Performing


Do not check or charge batteries that have a visual indicator that is bright yellow. Jump starting must not be used!

There is a risk of explosion during testing, charging or jump starting.

These batteries must be replaced.

- Select "Warranty Test".

- Select "inside the vehicle" or "outside of the vehicle".

- Select "at the battery pole" or "at the battery jump start terminal".

- Scan in the battery 2D code or manually select battery type and current strength.

- Measure the temperature. Hold the temperature sensor approximately 5 cm above the battery pole until the temperature is stable.

- Start the test.

- Print out the test report if necessary.