Door Window, Adjusting Height to Roof Pillar Seal

Door Window, Adjusting Height to Roof Pillar Seal

• Side window is adjusted higher by rotating adjusting screw - 4 - on coupling plate to the right. Adjust lower by turning left.

• One rotation of the adjusting screw means a door window height adjustment of about 1 mm.






• The door and roof are adjusted. The roof is closed.

• The door window is adjusted in direction of travel and angle.

• Window regulator basic setting is performed. Refer to => [ Window Regulator Basic Setting ] Window Regulator Basic Setting

- Remove cover caps on lower edge of door.

- Lower the door window completely.

- Rotate adjusting screw - 4 - on coupling plate - 3 - until adjustment dimensions are reached. Refer to => [ Door Window Adjustment Dimensions ] Door Window Adjustment Dimensions.

- Check adjustment of closed door.