Diagram 125/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument cluster control module, Data bus on board diagnostic interface, Electromechanical power steering indicator lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument cluster control module Overview of Control Modules

J533 - Data bus on board diagnostic interface Overview of Control Modules

K - Instrument cluster

K161 - Electromechanical power steering indicator lamp

T16 - 16-pin connector

T20 - 20-pin connector

T32 - 32-pin connector

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

* - Diagnostic connector

Previous Diagram 125/2 (Tracks 1-14)