Diagram 82/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Knock Sensor (KS) 1, Camshaft Position (CMP) Sensor, Fuel Pressure Sensor, Charge Air Pressure Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G31 - Charge Air Pressure Sensor 2.0L CCTA, CBFA and BPY Overviews

G40 - Camshaft Position (CMP) Sensor 2.0L CCTA, CBFA and BPY Overviews

G61 - Knock Sensor (KS) 1 2.0L CCTA, CBFA and BPY Overviews

G247 - Fuel Pressure Sensor 2.0L CCTA, CBFA and BPY Overviews

J519 - Vehicle Electrical System Control Module Overview of Control Modules

J623 - Engine Control Module (ECM), in plenum chamber, center Overview of Control Modules

T3w - 3-Pin Connector, on engine, front

T4ak - 4-Pin Connector

T6aq - 6-Pin Connector

T14b - 14-Pin Connector, near battery Overview of Connector Stations and Connectors

T60 - 60-Pin Connector

(D101) - Connection 1 (in engine compartment wiring harness)

(D103) - Connection 3 (in engine compartment wiring harness)

(D107) - Connection 5 (in engine compartment wiring harness)

(D108) - Connection 6 (in engine compartment wiring harness)

Previous Diagram 82/8 (Tracks 85-98)

Next Diagram 82/10 (Tracks 113-126)