Part 3

Special Tools

Special tools, testers and auxiliary items required

• Extractor Lever (VW 681)

• Bracket (30-211 A)

• Thrust Piece (T10042)

• Drift (T10169) or (T10362)

• Thrust Piece (T40008)

• Hot Air Blower (V.A.G 1416)

• Triple Square Socket Driver (3357)

• Connecting Pin (T10027 A)

• Hose Clamp Pliers (V.A.G 1275)

• Sleeve (VW 423)

• Pulling Hook (T20143/1)

• Thrust Block (T10083)

• Socket and Extended Bit (T10107) or (T10107 A)

• Trim Removal Wedge (3409)

Special tools, testers and auxiliary items required

• Engine Support Bridge (10-222 A)

• Engine Support Feet (10-222 A/8)

• Engine Support Adapter (10-222 A/3)

• Adapter (10-222 A/18)

• Transmission Support (3282)

Special tools, testers and auxiliary items required

• Pin (3282/29)

• Adjustment Plate (3282/33)

• Transmission Support Jig (3336) for transporting the transmission

• Torque Wrench (5-50 Nm) (V.A.G 1331)

• Torque Wrench (40-200 Nm) (V.A.G 1332)

• Engine-/Gearbox Jack (V.A.G 1383 A)

• Transmission Support Elements (determine when mounting the adjustment plate on the transmission support)

Special tools, testers and auxiliary items required

• Bracket (T10346) (Qty: 2)

• Engine Support Device (3300 A)

• Adapter (VW 771/40) from Slide Hammer-Complete Set (VW 771)

• Hose Clamps up to 25 mm Dia. (3094)

Special tools, testers and auxiliary items required

• Holding Plate (VW 309)

• Holding Fixture (VW 313)

• Transmission Support (VW 353)

• Thrust Tube (VW 455) or Sleeve (3160)

• Slide Hammer-Complete Set (VW 771)

• Sleeve (30-21)

Special tools, testers and auxiliary items required

• Bracket (30-211 A)

• Thrust Piece (T10042)

• Drift (T10169) or (T10362)

• Thrust Piece (T40008)

• Torque Wrench (5-50 Nm) (V.A.G 1331)

• Hot Air Blower (V.A.G 1416)

• For metal cover, thrust Piece (T10143) => [ Metal Cover ] Transmission, with a Sealing Cap Circlip for the Input Shaft

• For plastic cover, Press Tool for Shaft Seal (T10180) => [ Plastic Cover ] Transmission, with a Sealing Cap Circlip for the Input Shaft

• Extractor Lever (VW 681)

Special tools, testers and auxiliary items required

• Driving Sleeve (VW 244 B)

• Transmission Support (VW 353)

• Thrust Plate (VW 401)

• Thrust Plate (VW 402)

• Punch (VW 407)

• Tube 37 mm Dia. (VW 416 B)

Special tools, testers and auxiliary items required

• Guide Piece (VW 436 A)

• Guide Pin (VW 439)

• Slide Hammer-Complete Set (VW 771)

• Holding Fixture (VW 801)

• Guide Piece (10-15)

• Thrust Pad (3124)

Special tools, testers and auxiliary items required

• Bearing Driver (3264)

• Subframe Support Assem. Device (3290)

• Torque Wrench (5-50 Nm) (V.A.G 1331)

• Drift (T10169) or (T10362)

• Drift (T10168)

• Thrust Piece (T10203)

Special tools, testers and auxiliary items required

• - 1 - Kukko Extractor 14.5-18.6 mm (21/2)

• - 1 - Kukko Extractor 23.5-30 mm (21/4)

• - 4 - Kukko Support (22/2)

• Threaded Adapter from Kukko Support (22/1)

Special tools, testers and auxiliary items required

• Punch (VW 407)

• Drift (T10168)

• Thrust Piece (T40008)

• - 1 - Kukko Extractor 14.5-18.5 mm (21/2)

• - 1 - Kukko Extractor 23.5-30 mm (21/4)

• - 4 - Kukko Support (22/2)

Special tools, testers and auxiliary items required

• Thrust Plate (VW 402)

• Punch (VW 411)

• Tube Trans. Drive Shaft (VW 426)

• Thrust Pad 16.5/28 mm Dia. (VW 431)

• - 1 - Kukko Extractor 18.5-23.5 mm (21/3)

• - 4 - Kukko Support (22/1)