Door Window, Removing

Door Window, Removing






- Remove front door trim.

- Pry cover caps out.

- Lower the door window until clamping screws - 2 - of door window - 1 - are accessible.

- Loosen bolt - 4 - (do not remove) and press clamping brackets - 3 - apart.

- Remove the bolt - 2 -.

- Loosen subframe at bolts.

- Grasp between door and subframe and press clamping bracket locking mechanism - 3 - apart.

• If this cannot be done because of a power window malfunction, remove the window regulator motor and then slide the window down.

- Raise rear door window - 1 - and swing back and up out of door in - direction of arrow -.