Windshield Wiper System Overview

Windshield Wiper System Overview






1 Grommet

• For mounting wiper motor stud => [ (Item 11) Pins ].

2 Wiper Arm

• Removing and installing, refer to => [ Wiper Arms ] Service and Repair.

• Checking/adjusting the end position of the windshield wiper blades, refer to => [ End Position Of Windshield Wiper Blades, Checking/Adjusting ] Adjustments.

• Joint-Free Windshield Wiper, removing and installing, refer to => [ Joint-Free Windshield Wiper ] Joint-Free Windshield Wiper.

• Wiper arm service-/winter position, refer to => [ Wiper Arm Service-/Winter Position ] Wiper Arm Service-/Winter Position.

3 Hex Head Collar Nut

• 20 Nm

• Tightening specifications overview, refer to => [ Windshield Wiper and Washer System, Tightening Specifications ] [1][2]Specifications.

4 Cap

• Removing and installing, refer to => [ Wiper Arms ] Service and Repair.

5 Wiper Motor Shaft

6 Plenum Chamber Cover

• Removing and installing, refer to => [ Plenum Chamber Cover ] Plenum Chamber Cover.

7 Screw

• 8 Nm

• For mounting wiper frame to body.

• Tightening specifications overview, refer to => [ Windshield Wiper and Washer System, Tightening Specifications ] [1][2]Specifications.

8 Windshield Wiper Motor (V)

• Forms a common assembly unit with Wiper Motor Control Module (J400).

• Removing and installing, refer to removing and installing front windshield wiper system => [ Windshield Wiper System ] Windshield Wiper System.

9 Wiper Motor Control Module (J400)

• Forms a common assembly unit with Windshield Wiper Motor (V)

• Removing and installing, refer to removing and installing front windshield wiper system => [ Windshield Wiper System ] Windshield Wiper System.

10 Wiper Linkage

• Removing and installing, refer to removing and installing front windshield wiper system => [ Windshield Wiper System ] Windshield Wiper System.

11 Pins

• Is guided into grommet => [ (Item 1) Grommet ].