Diagram 88/14 (Tracks 169-182)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine control module, Wastegate bypass regulator valve, EVAP canister purge regulator valve 1, Secondary air injection solenoid valve, Camshaft adjustment valve 1, Turbocharger recirculation valve, Intake manifold runner control valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

J623 - Engine control module, in the center plenum chamber Control modules in front part of vehicle - Overview of Control Modules

N75 - Wastegate bypass regulator valve
Locations
[1][2]Diagrams

N80 - EVAP canister purge regulator valve 1
Locations
[1][2]Canister Purge Control Valve

N112 - Secondary air injection solenoid valve
Locations
[1][2]Air Injection Control Valve

N205 - Camshaft adjustment valve 1
Locations
[1][2]Diagrams

N249 - Turbocharger recirculation valve
Locations
[1][2]Diagrams

N316 - Intake manifold runner control valve 2.0L CCTA and CBFA Diagrams

T4x - 4-pin connector, on the lower left coolant fan

T14a - 14-pin connector, near the battery Overview of connector stations and connectors

T60 - 60-pin connector

T94 - 94-pin connector

(D180) - Connection 87a (in engine compartment wiring harness)

(D189) - Connection 87a (in engine wiring harness)

* - Coolant fan connection

*2 - from May 2010

Previous Diagram 88/13 (Tracks 155-168)

Next Diagram 88/15 (Tracks 183-196)