Diagram 88/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Heated oxygen sensor 2, Oxygen sensor after three way catalytic converter, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G108 - Heated oxygen sensor 2 Exhaust System Overview Heated Oxygen Sensor 2 -G108- / Oxygen Sensor 2 Heater -Z28-

G130 - Oxygen sensor after three way catalytic converter Exhaust System Overview Oxygen Sensor After Converter -G130- / Heater For Oxygen Sensor 1 After Converter -Z29-

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

J623 - Engine control module, in the center plenum chamber Control modules in front part of vehicle - Overview of Control Modules

T4bi - 4-pin connector, near the oxygen sensor

T4v - 4-pin connector, near the oxygen sensor

T94 - 94-pin connector

Z28 - Oxygen sensor 2 heater Heated Oxygen Sensor 2 -G108- / Oxygen Sensor 2 Heater -Z28-

Z29 - Heater for oxygen sensor 1 after catalytic converter Oxygen Sensor After Converter -G130- / Heater For Oxygen Sensor 1 After Converter -Z29-

(E30) - Connection 87a (in engine wiring harness)

Previous Diagram 88/15 (Tracks 183-196)

Next Diagram 88/17 (Tracks 211-224)