Parking Lamp Bulb

Parking Lamp Bulb

• The headlamp does not need to be removed to replace the parking lamp bulb.

• Illustrations depict replacement of parking lamp at left headlamp.

• Replacing the parking lamp bulb in the right headlamp is identical.

Removal

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Pull off cover cap - 1 -.






- Pull the bulb socket - 1 - with the parking lamp bulb out of the reflector. Pay attention to the length of the wires still connected.






- Pull the parking lamp bulb - 2 - straight out of the bulb socket - 1 - in - direction of arrow -.






Parking lamp bulb: Bulb 12V, 5W

Installation


When installing the cover cap, make sure the cap is properly seated. It is destroyed by entry of water into headlamp.

• Do not touch the glass of the light bulb, when installing. Your fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

Install in reverse order of removal, noting the following:

- Check headlamp for function.