Adaptive Chassis DCC Components and Installation Locations

Adaptive Chassis DCC Components and Installation Locations


The body acceleration sensors may not be interchanged with each other.






1 Dampening Adjustment Button (E387)

• Component location: In front of the selector lever in the center console.

• Explanations, refer to => [ Dampening Adjustment Button ] Description and Operation.

2 Shock Absorber with Right Rear Dampening Adjustment Valve (N339)

• Removing and installing, front wheel drive, refer to => [ Shock Absorber, FWD ] Shock Absorber, FWD.

3 Electronic Damping Control Module (J250)

• Component location: behind the right side luggage compartment trim.

• Removing and Installing, refer to => [ Electronic Damping Control Module ] Electronic Damping Control Module.

• if the electronic damping control module (J250) was replaced, then a basic setting to the adaptive chassis DCC must be performed. Refer to => [ Adaptive Chassis DCC, Basic Setting ] Testing and Inspection.

4 Rear Body Acceleration Sensor (G343)

• Component location: On the rear left shock absorber mount.

• Removing and installing, front wheel drive, refer to => [ Rear Body Acceleration Sensor, FWD ] Rear Body Acceleration Sensor, FWD.

5 Shock Absorber with Left Rear Dampening Adjustment Valve (N338)

• Removing and installing, front wheel drive, refer to => [ Shock Absorber, FWD ] Shock Absorber, FWD.

6 Left Rear Level Control System Sensor (G76)

• Removing and installing, front wheel drive, refer to => [ Left Rear Level Control System Sensor, FWD ] Left Rear Level Control System Sensor, FWD.

• Removing and installing, all wheel drive, refer to => [ Left Rear Level Control System Sensor, AWD ] Left Rear Level Control System Sensor, AWD.

• If the sensor was removed and then installed, then a basic setting to the adaptive chassis must be performed. Refer to => [ Adaptive Chassis DCC, Basic Setting ] Testing and Inspection.

Headlamps basic setting is performed using the Vehicle Diagnosis, Testing, and Information System (VAS 5051) in "Guided Fault Finding" function.

7 Left Front Body Acceleration Sensor (G341)

• Removing and Installing, refer to => [ Left and Right Front Body Acceleration Sensor ] Left and Right Front Body Acceleration Sensor.

8 Shock absorber with Left Front Dampening Adjustment Valve (N336)

• Suspension strut, removal and installation => [ Suspension Strut ] Suspension Strut.

• Suspension strut, servicing => [ Suspension Strut Assembly Overview ] Suspension Strut Assembly Overview.

9 Left Front Level Control System Sensor (G78) and Right Front Level Control Sensor (G289)

• Removing and Installing, refer to => [ Left and Right Front Level Control System Sensors ] Left and Right Front Level Control System Sensors.

• if the sensor was removed and installed, then a basic setting to the adaptive chassis DCC must be performed. Refer to => [ Adaptive Chassis DCC, Basic Setting ] Testing and Inspection.

Headlamps basic setting is performed using the Vehicle Diagnosis, Testing, and Information System (VAS 5051) in "Guided Fault Finding" function.

10 Shock Absorber with Right Front Dampening Adjustment Valve (N337)

• Suspension strut, removal and installation, refer to => [ Suspension Strut ] Suspension Strut.

• Suspension strut, servicing, refer to => [ Suspension Strut Assembly Overview ] Suspension Strut Assembly Overview.

11 Right Front Body Acceleration Sensor (G342)

• Removing and installing, refer to => [ Left and Right Front Body Acceleration Sensor ] Left and Right Front Body Acceleration Sensor.