Wiper Motor

Wiper Motor

Special tools, testers and auxiliary items required

• Pry Lever (80-200)

Removal






- Pry off ball head - arrow - of linkage - 1 - from motor crank using (80-200).

- Remove the nut - 1 -.






- Remove motor crank - 2 - from wiper motor shaft.

- Remove mounting bolts - arrows - and remove wiper motor with control module out of wiper frame.

Installation






- Insert wiper motor with control module into wiper frame and secure it with mounting bolts - arrows -.

- Tighten the threaded connections to the specification given in the assembly overview. Refer to => [ Windshield Wiper System Overview ] Windshield Wiper System Overview.

- Place motor crank - 1 - onto wiper motor shaft. Distance - a - to stop - 2 - must be 3 +/- 1 mm.






- Use the nut - 3 - to attach the motor crank and the windshield wiper motor shaft.

- Tighten the threaded connections to the specification given in the assembly overview. Refer to => [ Windshield Wiper System Overview ] Windshield Wiper System Overview.

- Push ball head - arrow - of linkage - 1 - onto motor crank.