Backrest Release Cable, Seat with Pass-Through

Backrest Release Cable, Seat with Pass-Through

Removing

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Remove the front seat. Refer to => [ Front Seat ] Front Seat.

- Attach the seat to the fixture for seat repair (VAS 6136).

- Remove right trim on seat. Refer to => [ Trim, Right, Seat with Pass-Through ] Trim, Right, Seat With Pass-Through

- Remove left trim on seat. Refer to => [ Left Seat Trim with Pass-Through ] Left Seat Trim With Pass-Through

- Release backrest and fold backrest onto seat.

- Loosen cover from seat frame in front seat backrest area. Cover is not removed from front seat backrest.

- Remove the cable bracket - 1 - on left side of the lower seat frame. To do this, release locking tab in - direction of arrow 2 - using a screwdriver and remove cable bracket in - direction of arrow 3 -.






- Remove the clip - 4 - for the cable from the lower seat frame.

- Remove the release cable from the retainers on the lower seat frame.

- Unclip the cable bracket - 1 - from retainer - 2 - on right side.






- Slide the release cable downward and remove from the retaining pins - 3 -.

Installing

Install in reverse order of removal.